Vax Turbo Force V-060P Spécifications télécharger pdf (Page 34)

Tighten endplate bolts to the point

where the endplate just touches the

housing.

19. With a prybar and a block of wood,

lift the endplate to make certain the seal

gap is properly set and tighten the

endplate bolts to 35-40 ft lb of torque.

Tighten both endplates in this

manner.

20. Seat the bearings on both endplates

with a bearing driver or punch.

21. At this point you should be able to turn the pump by

hand.

22. Install the seal in the front bearing cover.

Lubricate the seal and seal surface on the rotor and install

the front bearing cover.

Reinstall the oil pump drive key, oil pump mount

assembly, and gaskets to the pump.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 46 47

Pas de commentaire

Vax Turbo Force V-060P Spécifications Page 34