Vax Turbo Force V-060P Spécifications télécharger pdf (Page 28)

16. At this point you should be able to

turn the pump by hand.

17. Reinstall the oil pump drive key

and oil pump mount assembly to the

pump.

Be sure to line up the oil pump drive key

and the oil pump shaft prior to

tightening the assembly to the pump.

18. Connect the oil lines to the oil pump .

The pump is now ready to run.

19. Start the pump at a slow RPM and allow to run for a

few minutes until oil can be seen in the lines.

The pump is now ready to go to work.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 46 47

Pas de commentaire

Vax Turbo Force V-060P Spécifications Page 28