Vax Turbo Force V-060P Spécifications télécharger pdf (Page 31)

8. Locate the replacement seals and

install them in the endplates with the

seals positioned back to back.

Replace the seal in the bearing cover

with the lip facing outward.

9. Lubricate and install the bearings

in the endplates.

10. Locate two pieces of threaded rod

3/8-18 thd. to use as guides and screw

them into the two top holes in the

housing.

Locate proper number of gaskets and

slide on the threaded rods.

Do not use any gasket sealer.

11. Lubricate the housing bore.

12. Lubricate seal sleeve and drive the

proper endplate on the input end of the

rotor.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 46 47

Pas de commentaire

Vax Turbo Force V-060P Spécifications Page 31