Vax Power 6 SERIES Guide d'installation Page 48
- Page / 199
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
3.1 DSSI Installation Overview
This chapter provides guidelines for installation. Please
refer to the manuals listed in Table 3–1 for complete
installation instructions. The main steps in installation
include cabling, terminating the DSSI bus, setting node IDs
for the bus, and changing parameters on ISEs as required
(see Table 3–2).
Table 3–1: DSSI Documentation
Title Description
DSSI VAXcluster Installa-
tion Guide (EK–DVCLU–IN)
Multi-host mixed DSSI VAXcluster systems. In-
cludes configuration rules, supported ISEs, and instal-
lation instructions.
KFMSA Module Installation
and User Manual (EK–KFMSA–
IM)
For installing KFMSA adapters into existing VAX 6000
systems. Describes setting termination and node IDs
for the adapters using EVCXF.
KFMSA Module Service Guide
(EK–KFMSA–SV)
Troubleshooting and diagnostics for the KFMSA
adapter. Includes configuration information.
VAX 6000/SF2xx Embedded
Storage Installation Guide (EK–
EMBED–IN)
For single-host systems or DSSI VAXclusters with em-
bedded storage. Gives acceptance procedures, set-
ting node ID and ISE parameters, discusses disk strip-
ping.
SF7x Storage Enclosure and
SF2xx Storage Array Cabinet Ser-
vice Guide (EK–SF72S–SG)
Fault isolation and troubleshooting guidelines for the
SF7x enclosure boxes and SF2xx storage array cab-
inets.
SF2xx Storage Array Installa-
tion Guide (EK–SF200–IG)
Installing an SF2xx storagearray cabinet, includingca-
bling, configuration, acceptance, setting node IDs.
TF85 Cartridge Tape Subsys-
tem Owner’s Manual (EK–TF85–
OM)
Operation and user instructions for the TF85 tape
drive.
TF85B TapeSubsystemOverview
(EK–TF85B–OV)
Overview of the embedded TF85 tape subsys-
tem including configuration rules, booting, and field-
replaceable units.
3–2 VAX 6000 Series Installation Guide
- Order Number EK–600EB–IN.002 1
- Contents 3
- Chapter 7 System Self-Test 5
- Chapter 8 Verification 5
- Intended Audience 11
- Document Structure 11
- VAX 6000 Series Documents 12
- Title Order Number 13
- Operation 13
- Service and Installation 13
- Options and Upgrades 13
- Associated Documents 14
- System I/O Options 15
- Operating System Manuals 16
- VAXclusters and Networking 16
- Peripherals 17
- VAX Manuals 17
- Site Preparation 18
- Slots Function 20
- 154 CM (60.5 IN) 21
- Figure 1–2: Airflow Pattern 23
- 1.3 Cabinet Sizes 24
- Site Preparation 1–9 25
- 1.4 Power Requirements 26
- Table 1–5: Power Requirements 27
- Unpacking 29
- 2.1 Inspect the Shipment 30
- Item Use 32
- Tool Use 33
- 2.4 Remove from the Pallet 36
- 2.5 Leveling the Cabinet 38
- HEX WRENCH 39
- TERMINAL 40
- ETHERNET 42
- 2.8 Connect the FDDI Cable 44
- Chapter 3 47
- Table 3–1: DSSI Documentation 48
- Table 3–2: DSSI Installation 49
- DEMNA KFMSADEMFA 51
- 3.4 DSSI Basics 54
- Term Reference Definition 55
- 3.4.1 KFMSA Adapter 56
- DSSI Bus 1 58
- DSSI Bus 2 58
- 3.4.3 SF7x Enclosure Box 60
- 3.4.5 Single-Host Systems 64
- Table 3–5: KFMSA Options 69
- Table 3–6: DSSI Cable Kits 69
- KFMSA NODE ID 72
- SELECT KNOB 72
- 3.5.2 Set Node IDs 74
- Power Up System. 76
- Self-Test Runs 76
- Table 3–7: VAX/DS File Names 79
- 3.6.3 Example: Run EVCXF 82
- Connecting to a CI VAXcluster 88
- 4.1 CI Adapter Overview 89
- Standard or 90
- Optional Function 90
- 4.3 Setting CIXCD Parameters 93
- Boot Time 99
- Arbitration (Optional) 101
- SECTION D 103
- Cluster 103
- 4.4 Setting CIBCA Parameters 105
- SECTION E 107
- OUT OUT OUT OUT IN OUT OUT IN 108
- TRANSMIT 111
- CONNECTORS 111
- RECEIVE 111
- Connecting to Tapes and Disks 114
- 5.1 Architecture 115
- Adapter Bus 116
- Installation 116
- Instructions Connects to 116
- 5.2 Cabling TU Tape Drives 117
- CONTROLLER 119
- Powering Up the System 122
- 6.1 Prepare the Cabinet 123
- 6.3 Check the Power 127
- Powering Up the System 6–7 128
- LED Condition Color Meaning 130
- Powering Up the System 6–11 132
- Table 6–2: Upper Key Switch 134
- Table 6–3: Lower Key Switch 134
- 6.5.2 Restart Button 135
- Table 6–4: Restart Button 136
- 6.5.3 Status Indicator Lights 137
- msb-0124-91 137
- Light Color State Meaning 138
- System Self-Test 140
- Verification 148
- 8.1 Console Load Devices 149
- Model 3/400 151
- Site Management Guide 152
- SELF-TEST OK LED 155
- CONNECTOR 155
- EXTERNAL 155
- LOOPBACK LED 155
- BOOT /XMI:m 159
- ISL_LVAX_x 159
- BOOT /R5:10 CSA1 160
- Table 8–2: VAX/DS File Names 166
- Model Number 168
- File Name 168
- 8.8 Set Boot Devices 169
- 8.9 Record System Parameters 171
- System Method 172
- Example 8–9: Running UETP 173
- Module Handling 177
- B.1 Handling Modules 178
- B.2 Inserting Modules 180
- Appendix C 183
- C.1 Prepare the Cabinets 184
- TOP COVER 185
- C.2 Join the Cabinets 186
- XMI-to-VAXBI Adapter Cables 188
- Table C–1: Cable Connections 189
- C.5 DWMBB Cabling 192
- DSSI Configuration Sheets 193
- DSSI Configuration Sheets D–3 195
Produits connexes et manuels pour Aspirateurs Vax Power 6 SERIES
(148 pages)
Aspirateurs Vax V-106AA Manuel de service
(120 pages)
(120 pages)
Aspirateurs Vax V-044 Guide de l'utilisateur
(12 pages)
(12 pages)
Aspirateurs Vax V-002 Manuel d'utilisateur
(50 pages)
(50 pages)
Aspirateurs Vax C90-P2 SERIES Spécifications
(288 pages)
(288 pages)
© 2020, manymanuals.fr. Tous droits réservés | 1.251 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels