Boot VAX/DS from a CD Server
Ask the system manager for the location of the closest CD server. Load
the diagnostic compact disk into the CD drive, part number AG-PDWW*-
RE, "VAX 6000 CMPLT DIAG CD-ROM" (see Figure 8–5). To boot a CD
server, use the information gathered in Section 8.3 for the boot command
qualifiers.
Figure 8–5: Loading a CD-ROM
msb-0483B-90
Boot VAX/DS from Tape Drive
To boot from a TK, load the diagnostic tape, part number AQ-PDWX*-DE,
"VAX 6000 CMPLT DIAG TK50," into the tape drive, and at the console
prompt enter the boot command:
BOOT /R5:10 CSA1
where R5:10 chooses the VAX Diagnostic Supervisor, VAX/DS. CSA1 is
defined as the console load device, so the system will boot from the tape in
the cabinet or a TF857 tape in an SF2xx storage cabinet.
Verification 8–13
Commentaires sur ces manuels