Vax 4000 Model 200 Manuel de service Page 70
- Page / 138
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Table 3–4 (Cont.): TF85 Tape Drive Indicators
Write
Protected Tape in Use
Use Clean-
ing Tape
Open
Handle Condition
Blinking Blinking Blinking Blinking A fault is occurring. Press
the Unload button to unload
the tape cartridge. If the
fault is cleared, the yellow
indicator blinks while the
tape rewinds. When the
green indicator comes on,
you can move the handle
to remove the cartridge. If
the fault is not cleared,
all four lights continue to
blink. Do not attempt to
remove the tape cartridge.
Call your Digital service
representative.
3.1.2.7 Cleaning the TF85 Tape
When the Use Cleaning Tape indicator lights, load a CleaningTape III
cartridge to clean the drive. Load the cleaning cartridge as you load a
tape cartridge. When the cleaning is finished, the beeper sounds to unload
the cleaning cartridge.
The CleaningTape III cartridge is good for 20 to 24 cleanings. If the cleaning
cartridge expires, the Use Cleaning Tape indicator remains on.
NOTE: If the Use Cleaning Tape indicator is not lit, the cleaning cartridge
will not load.
3.1.3 TK70 Tape Drive
The TK70 tape drive is located behind the upper door of the system. To use
the drive, move the key to the top position and open the door.
The TK70 tape drive holds one removable magnetic tape cartridge. The
drive can read data written on either a CompacTape II or CompacTape
cartridge. You can identify the type of cartridge by the label on the
cartridge.
You can use a CompacTape II or CompacTape cartridge as an input device
to load software or data into your system. The TK70 drive can read data
on both types of cartridges, written by either a TK70 drive or a TK50 drive.
(The TK50 drive records data in a format different from that of the TK70.)
3–18 VAX 4000 Model 200 (BA430) Operation
- VAX 4000 Model 200 (BA430) 1
- Operation 1
- Contents 3
- Appendix C Backup Procedures 6
- Examples 6
- Conventions 10
- System Overview 11
- MLO-004032 12
- MLO-004958 13
- Figure 1–3: Upper Door Opened 14
- System Overview 1–5 15
- 1.1.1 BA430 Enclosure 16
- System Overview 1–7 17
- MLO-005386 18
- Slots 12 - 1 20
- MLO-005504 22
- Connector 25
- MLO-005506 26
- System Expander 1 Expander 2 28
- 1.2.1 Base System Components 29
- 1.2.2 Optional Components 31
- System Overview 1–27 37
- Operating the System 38
- 2.2.2 Special Operation 39
- 2.3 Turning On the System 41
- Indicator Normal Indication 42
- 2.4 Booting the System 43
- SET BOOT EZA0 47
- SET BOOT DUA0,DIA0,MIA0,EZA0 47
- Table 2–2: Device Names 48
- 2.5 Using the System 50
- 2.6 Halting the System 50
- 2.7 Restarting the System 51
- 2.8 Turning Off the System 51
- Condition 52
- Operating the System Options 53
- Write-Protect Button 55
- Run/Ready Button 55
- Bus Node 55
- Fault Indicator 55
- Control Position Function 56
- 3.1.2 TF85 Tape Drive 58
- MLO-006543 59
- Label Slot 61
- Not Write 63
- Protected 63
- Green Indicator Is On 66
- Cartridge Arrow 66
- Is Facing Left 66
- Yellow Indicator Blinks 66
- MLO-006545 68
- 3.1.3 TK70 Tape Drive 70
- Green Light Is On 78
- Yellow Light Blinks 78
- MLO-002460 80
- Orange Yellow Green Condition 81
- 3.1.4 TLZ04 Tape Drive 82
- MLO-005538 83
- Indicator Color(s) Meaning 84
- MLO-005331 87
- Cassette Cleaner 89
- 3.1.7 TSV05 Tape Drive 90
- 3.1.8 TSZ07 Tape Drive 90
- 3.1.9 TU81E Tape Drive 90
- 3.2.2 Synchronous Controllers 92
- 3.2.3 Network Controllers 93
- 3.3 Real-Time Options 94
- 3.4 Printer Options 94
- 3.5 Adding Options 95
- Related Documentation 96
- Appendix B 97
- B.1 DSSI Device Parameters 97
- Duplicate 1 100
- Duplicate 2 100
- >>>) 101
- SHOW DSSI 101
- SHOW UQSSP 101
- B.3.3 Setting Unit Number 105
- MLO-006579 107
- B.3.4 Setting Node Name 108
- B.3.5 Setting System ID 108
- System ID 108
- Backup Procedures 112
- C.3 Restoring the System Disk 120
- 8. Press the Halt button 122
- 9. Reboot the system 122
- Backup Procedures C–11 122
- Removing Unwanted VMS Files 123
- $ RUN SYS$UPDATE:DECW$TAILOR 124
- Glossary 125
Produits connexes et manuels pour Serveurs Vax 4000 Model 200
(27 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.809 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels