Vax VZL-401CSP Guide de l'utilisateur télécharger pdf (Page 9)

ax Careline 0870 606 1248

belt or brush bar / lightbulb removal and replacement

8. General maintenance

WARNING: To reduce risk of injury from moving

parts - unplug before servicing.

Debris removal/nozzle guard

• Check to see if dirt container is full; empty if needed.

• Plug cleaner in and check to see if there is any suction

at end of hose.

1. Unwrap hose from caddy. Twist and unlock to remove

clogs. Clean out hose with a broom handle. Check access

door on back of cleaner (near hose end). Remove the

seven (7) screws and check for obstruction (Fig.8/1).

2. Remove dirt container (Pg. 6) and check dirt container

inlet located on cleaner.

3. Remove nozzle guard by removing the three (6) screws.

Remove obstructions (Refer to Page 8 for belt and

brushbar removal and replacement).

Debris removal/Turbo Tool

Rotate locking ring 180

and turn Turbo Tool over

(Fig.8/3).

Replace all six (6) screws to secure nozzle guard (Fig.6/8).

7. Lightbulb: removal and

replacement

Please contact Vax on 0870 606 1248 for further

advice.

IMPORTANT: Do not attempt to remove or replace the

lightbulb yourself.

Fig.6/8

Fig.6/7

Fig.8/2

Fig.8/1

LOCKING RING

Fig.8/3

Vax VZL 401CSP User Guide.qxd:VZL-401CSP User Guide 3/9/08 16:43 Page 9

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Vax VZL-401CSP Guide de l'utilisateur Page 9