Vax V-044 Guide de l'utilisateur télécharger pdf (Page 5)

ssembly

5. Assembly

IMPORTANT: Always remove the power

plug from the electrical outlet before

assembling or removing accessories.

Handle Assembly

1. Firmly push the back panel onto the base

assembly. Ensure it is fully located before

inserting the two short screws (Fig.5/1).

2. Slide the handle into place onto the top of the

back panel. Secure the top handle to the back

panel by inserting the two long screws (Fig.5/2).

Assembling the Dirt Container

3. Insert the bottom of the dirt container to align

with the tab on the upper cover of the motor. To

secure the dirt container, push the top in place,

there will be an audible click when it is secure

(Fig.5/3).

Assembly of the Hose

4. Align the tabs on the lower hose/inspection

tube with the slots on the hose. Push and turn

the hose clockwise until secure (Fig.5/4).

5. Wrap the hose round and through the hose

clip and then down and insert into hose

connector (Fig.5/5).

Cord Storage

This vacuum cleaner is equipped with a

convenient cord storage feature. The power

cord winds around the two cord holders at the

side of the unit. The bottom cord holder has a

quick release feature. Turn the cord hook to the

left or the right to remove the power cord

(Fig.5/6).

Line up here

Fig.5/3

ig.5/1

Fig.5/2

Fig.5/6

Fig.5/4

Fig.5/5

V-044LW (JMB) User Guide.qxd:JMB JMU4010 User Guide 18/3/08 17:36 Page 5

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Vax V-044 Guide de l'utilisateur Page 5