Vax Mach 9 Guide de l'utilisateur télécharger pdf (Page 40)

processing coin

Operating the sorter

1. Move the Power Switch, located on the right

side of the Sorter to the “ON” position.

2. Observe the Display. It should be at the

“HOME” position (showing “BATCH TOTAL”

and “00” ).

3. Place the coins for the first batch in the In-

spection Pan and remove any unwanted ob-

jects.

Note: All Coin Bags must be in position for

the Sorter to operate. If one or more bags

are not properly installed a display message

will appear indicating which station is in er-

ror. Install a Coin Bag at that station. The

Display will return to the HOME SCREEN.

4. Press the MOTOR ON / OFF Key on the

Control to start the Sorting Motor.

5. Lift and tilt the Inspection Pan to transfer the

coins into the Sorting Area.

6. When the sorting is complete, press the

MOTOR ON / OFF Key on the Control to

stop the Sorting Motor. (The Sorting Motor

stops automatically approximately seven (7)

seconds after the last coin has been

processed if left unattended.)

DO NOT PLACE HANDS IN FUN-

NEL AREA WHEN SORTER IS

OPERATING AND INSPECTION

PAN IS FORWARD.

NEVER ALLOW LONG HAIR OR

LOOSE CLOTHING, (TIES, ETC.)

NEAR FUNNEL AREA WHEN

SORTER IS OPERATING.

Inspection

Pan

FIGURE #115

INSPECTION PAN

1.00 BAG NOT INSTALLED

INSTALL BAG

REMOVE ANY DAMAGED COIN OR

FOREIGN OBJECTS. FAILURE TO DO

SO MAY DAMAGE THE ELASTIC DRIVE

DISC, WHICH MAY NOT BE COVERED

UNDER WARRANTY OR M/A

CONTRACT.

THE (OPTIONAL) MAGNET WILL

CATCH METAL ITEMS SUCH AS

METALLIC COIN SLUGS, WASHERS,

PAPER CLIPS, ETC., THAT SHOULD

NOT ENTER THE SORTER.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 109 110

Commentaires sur ces manuels

Pas de commentaire

Vax Mach 9 Guide de l'utilisateur Page 40

Commentaires sur ces manuels

Produits connexes et manuels pour Aspirateurs Vax Mach 9